Ceramic Shampoo

With Si02 technology

DESCRIPTION

ADVANTAGES

• 3in1: washes, seals and protects for 90 days in one operation.
• It contains SiO2 superhydrophobic ceramic polymers that bind to the surface creating a shield resistant to both caustic and acid chemical agents.
• It provides the treated surface with self-cleaning hydrophobic properties for a long-lasting clean car.
• It leaves the surface silky, providing it with extreme shine comparable to wax polish in jars.
• It creates a lubricated and balanced foam that facilitates removal of dirt, protecting it against the formation of micro scratches or swirls.
• If used as a maintenance product, it will increase the protective properties of the wax, sealant or ceramic coating previously applied. 

RECOMMENDATIONS

Make sure that the surface of the vehicle is not hot and that the car is in the shade. We recommend using the two-bucket washing method (one with a shampoo/water solution and the other with clean water only) together with a pad or microfiber glove like our Double Face. First pre-wash the vehicle with our Foam Gun Prewash to remove the coarser dirt from the surface and to facilitate the next manual washing stage. We recommend using the two-bucket washing method (one with a shampoo/water solution and the other with clean water only) together with a microfiber or micro wool glove.

First of all, carry out a prewash with our Foam Gun Prewash to remove the coarse dirt present on the surface and facilitate the subsequent manual washing phase. To use Ceramic Shampoo correctly, we recommend using the two-bucket washing method (one with the shampoo/water solution and the other with clean water only) together with a microfibre mitt such as our "Double Face" or a sponge/pad such as our "Microfiber Pad".

To wash the rims and tyres, use an additional tool (sponge or mitt). Using the bucket screen helps remove dirt and impurities from the mitt or sponge, allowing it to settle on the bottom of the bucket. To learn more about the double bucket washing technique, watch the video dedicated to cleaning accessories.

INSTRUCTIONS FOR USE & DILUTIONS

Hand wash with bucket: dilute 4 caps of the Ceramic Shampoo in a bucket of water and use it as a normal shampoo, starting from the bottom and always with a wet vehicle, using a soft pad or microfiber glove. If you want to increase the hydrophobic and protective performance, dilute the product in a bottle at a ratio of 1:5 and spray the solution onto the said pad or washing glove. Wash the vehicle in steps, half at a time, without letting the product dry on the bodywork. Then rinse and proceed with drying it using our Super Dryer microfiber cloth.

Foam Gun: first of all carry out the pre-wash with Foam Gun Prewash and hand wash with a glove using Neutral Foam Shampoo, then dispense the product previously diluted 1:3 (1 a part of product and 3 of water) on the whole vehicle, wait for at least 1 minute and rinse with high pressure starting from top to bottom, then proceed with drying with the Super Dryer microfiber cloth.

FREQUENTLY ASKED QUESTIONS