Maniac Line Wheel and Tire Cleaner

Removes brake dust and road dirt

DESCRIPTION

Before you start to wash the vehicle, it is important to remove any dirt which may have collected inside the wheel compartment: ON RIMS particularly, we can find an accumulation of dust from the brakes.

ON THE TIRES there can be a layering of the tire shine which has been previously applied as well as road dirt.

THE WHOLE WHEEL COMPARTMENT often collects road dirt, even
coarse dirt such as mud or typical winter dirt. This is particularly aggressive due to the presence of road salts.

This step is essential not only because it allows us to speed up subsequent operations, but also because, by eliminating coarse dirt, we reduce the risk of damaging the bodywork as it is removed in the subsequent washing phases.

ADVANTAGES

• Effortlessly dissolves winter road dirt and brake dust that deposit on the rims, restoring its original appearance.
• Due to its high detergency capacity it is also suitable for cleaning the suspension section, the tyres and the plastic coverings of the wheel arch compartment.
• Is able to remove previously applied polishes, preparing tyres for polishing or dressing.
• It has a specific and balanced acid-free, effective and safe formula.
• Versatile: depending on the type of dirt, it can be used with dilution up to 1:10.
• Sweet and pleasant scent. 

MECHANISM OF ACTION

Before you start to wash the vehicle, it is important to remove any dirt which may have collected inside the wheel compartment: ON RIMS particularly, we can find an accumulation of dust from the brakes. ON THE TYRES there can be a layering of the tyre shine which has been previously applied as well as road dirt. THE WHOLE WHEEL COMPARTMENT often collects road dirt, even coarse dirt such as mud or typical winter dirt. This is particularly aggressive due to the presence of road salts. This step is essential not only because it allows us to speed up subsequent operations, but also because, by eliminating coarse dirt, we reduce the risk of damaging the bodywork as it is removed in the subsequent washing phases.

PRECAUTION

Never use on hot surfaces and never let the product dry on the surface. Do not use on aluminum, anodized and light alloy rims. Do not use on motorcycles.

INSTRUCTIONS FOR USE

• For extraordinary cleaning, on difficult and strongly anchored dirt, use the product diluted up to 1:3 (1 part of product and 3 parts of water).
• For winter dirt, dilute the product 1:5 (1 part of product and 5 parts of water).
• For summer dirt, dilute the product 1:10 (1 part of product and 10 parts of water). Spray the product on the wheel and tyre surface, leave it to act for about 2-5 minutes and, if necessary, work with a brush until you reach the hidden areas. Rinse well.

If after washing with WHEEL AND TYRE CLEANER you still notice persistent dirt, especially in the corners of the rim, it should be ferrous contamination and not road dirt: in this case we recommend to use our decontaminant IRON REMOVER for easily remove present contaminations.

RECOMMENDATIONS